installation:1. The pre-embedded bolts of the cantilever crane are pre-buried at the user's site according to the drawings. The column can be installed after two weeks.2. Stand up the column and note that the column must be vertical.

Fixed-column jib cranes (also known as column jib cranes, column-type jib cranes, column-type cantilever cranes, column-type jib cranes, fixed-column jib cranes, fixed-column cantilever cranes) are adapted to modern production.

Jib crane is more flexible, wide adaptability and other characteristics, is a necessary independent emergency lifting equipment on the efficient automatic production line, with it can ensure the smooth production line.

The strength of the jib crane is light. The crane is composed of the column, the rotary arm slewing drive and the electric hoist. The underside of the column is firmly fixed on the concrete.

The fixed-column jib crane consists of a column device, a slewing device, a slewing device and an electric hoist.

Jib crane is one type of crane, it's often used in workshop and lifting goods that's not heavy. What's more, Jib crane has three types. For example, fixed jib crane, wall

Installation shall be done by fixing the crane on cement foundation with M45 ground bolts (refer to the diagram of foundation).1.Installation of columnMake a foundation in advance and leave pits for the column. Put some calcium base grease into the bearing on the top end of the column, hoist the col