Henan Hengyuan Crane Machinery Group Co., Ltd.
  TEL: 86-373-3765556
You are here: Home » Products » Overhead Crane » Single girder overhead crane » Single Girder Suspension Overhead Crane


   0086 15136772061
  sales@hycranecn.com 
  NO.6 Juren Ave.,Henan Crane Industrial park.

Single Girder Suspension Overhead Crane

Share to:
Single girder suspension crane can work smoothly without the influence of weather or other ground works
  • LX


LX single girder suspension overhead crane belongs to single girder overhead crane, which often uses CD or MD electric hoist as its main lifting mechanism, and it is often set in the workshop, warehouse, factories and so on. The main beam of single girder suspension crane is suspended on the H tracks, which often has lower loading weight than general single girder overhead crane. However, it is especially suitable for small workshops that have small working space and low working intensity.
Single girder suspension crane can work smoothly without the influence of weather or other ground works. In addition, it can be equipped with a short cantilever to enlarge the its lifting span. Hengyuan Group is a trust-worthy single girder suspension crane manufacturer, which has high reputation, rich experience and large production scale. It is always easy to locate a right overhead travelling crane for your projects with low costs from Hengyuan Group. Come and send us your inquiry if you are interested.
Features and Advantages:
1. Light working duty. Light dead weight, light wheel-pressure.
2. Competitive price, tight structure, light dead weight and light wheel load.
3. Light working duty. Light dead weight, light wheel-pressure.
4. Tight dimensions, low building headroom, light dead weight and light wheel load.

Safety Device

1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch, rubber buffers, protective earthing, crane switch and travel end switch.
6. Sub-assemblies characteristic are tested before assembly.




        End beam

         Buffer motor drive
        With roller bearings and 

        permanent iubncation



        Main beam

        With strong box type and 

        standard camber

        There will have 

        reinforcement plate inside



        Crane hoist

Pendent & remote control


        Height:max 100m



       Crane hook

Pulley Diameter:Φ125/


          Material:Hook 35CrMo



05 5(1)

       Wire rope

        Heavy bearing, strong and 

          durable, not easy to rotate, 

          not easy to break

Technical data
Lifting Capacity T  1-15ton
Span m  7.5~22.5m
Speed Lifting MD1 hoist m/min 8/0.8 (7/0.7) 

CD1 hoist m/min 8 (7) 
Traveling of electric hoist m/min  20
Traveling of crane m/min 20/30
Wheel diameter Φ270
Width of trail 37~70mm
Operational Model remote control/Pendend
Working Duty A3
Power Supply 3phase A.C. 380V, 50Hz or on your request

Product Inquiry

Contact us

   ADD: NO.6 Juren Ave.,Henan Crane Industrial park
  TEL: 86-373-3765556
   Mobile: 0086 18812487899
   FAX: 86-373-3765556
  Mail:  sales@hycranecn.com


More >>