Henan Hengyuan Crane Machinery Group Co., Ltd.
  TEL: 86-373-3765556
You are here: Home » Products » Overhead Crane » Double girder overhead crane » Electromagnetic Overhead Crane


   0086 15136772061
  sales@hycranecn.com 
  NO.6 Juren Ave.,Henan Crane Industrial park.

Electromagnetic Overhead Crane

Share to:
qc bridge overhead magnetic crane with magnet industry standard mainly relies on the magnet, using the electromagnetic principles
  • QC

  • 5-15M/MIN
  • 20-40M/MIN
  • 50-100M/MIN
  • A5-A7
  • cabin control/wire rope remote control
  • IP54
  • F
  • request
  • 3 phase 380V 50hz or request


The difference of electromagnetic overhead crane and general overhead crane lies the hook assembly, and it adopts magnetic disk to attract steel or other materials instead of traditional hooks. It is a special overhead travelling crane with electromagnetic disk, special used in metallurgy and mechanism factory load and unload metallic materials such as steel plate, scrap iron, and so on. It is an heavy duty crane with working grade A6~A8, cabin control, crane weight including electromagnetic disk dead weight.
Remote control or cabin or both Crane girder: The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and small wheel loads being transmitted to the crane runway. Primer and finishing paint color can be adjusted according to your demand. The working temperature is between minus 25 degrees to 40 degrees, and the working class is generally A6. Hengyuan Group also offer semi gantry crane, electric hoist, container crane for sale, portable jib crane for sale etc. Contac us at any time for a free quotation.
Safety Device

1. Overload protection and main lifting motor with thermal protection.
2. Hooks with latch, rubber buffers and protective earthing.
3. Crane switch, travel end switch and emergency switch can stop all movement when any dangerous happened.
4.  All crane must be assembled and tested before leaving factory and offer the certification of test.




        End beam

         Buffer motor drive

        With roller bearings and 

        permanent iubncation




       Main beam

         with strong box type and standard
         camber ,there will have
         reinforcement plate inside



        Magnetic Spreader

        Strong suction, simple 

        operation, strong stability,

        low energy consumption



       Crane Trolley

1.High working duty hoist mechanism.

         2.Working duty:A6-A8



05 6
         Crane cabin

       1.cloth and open type

         2.air-conditioning provided

         3.interlocked circuit breaker provided

Technical Data
Capacity t 16/3.2-32/5
Working duty A6
Span m 10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5
Max. Lifting Height m 16
Speed Hoisting Electromagetic m/min 19.9
Crab travelling 39.5
Trolley travelling 115.6 116.8
Motor Hoisting Electromagetic Type kW YZR200L-6/22
Crane travelling YZR112M-6/15
Trolley travelling YZR132M1-6/2X5.5 YZR160M2-6/2X7.5
Weight Crane t 2.384
Total Weight 13.36 14.98 16.92 19.75 22.28 26.65 29.97 32.97
Max. wheel load kN 74.5 80 86.5 94 101.5 113 121.5 128.5
Electro-magnetic disk Model MW5-90L
Attracting weight kg 4200
Dead weight 800
Diameter mm 900
Steel track Recommended 38kg/m
Power source 3-phase A.c 50Hz 380V or on your request

Product Inquiry

Contact us

   ADD: NO.6 Juren Ave.,Henan Crane Industrial park
  TEL: 86-373-3765556
   Mobile: 0086 18812487899
   FAX: 86-373-3765556
  Mail:  sales@hycranecn.com


More >>